Chevrolet 2012 Volt Owner's Manual page 65

Hide thumbs Also See for 2012 Volt:
Table of Contents

Advertisement

WARNING
A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to
be sure that the safety belts are
properly routed and attached, and
are not twisted.
To fold the seatback down:
Notice: Folding a rear seat with
the safety belts still fastened may
cause damage to the seat or the
safety belts. Always unbuckle the
safety belts and return them to
their normal stowed position
before folding a rear seat.
A. Safety Belt Guide
B. Safety Belt Storage Clip
1. Remove the safety belt from the
safety belt guide (A) and place it
in the storage clip (B).
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
The safety belt should remain
in the storage clip while the
seatback is in the folded
position.
2. Pull the seatback release lever
to unlock the seatback.
A tab near the lever raises when
the seatback is unlocked.
3. Fold the seatback forward.
3-9

Advertisement

Table of Contents
loading

Table of Contents