Canon PIXMA iP8720 Network Installation Manual page 5

Installing the Drivers & Software
To set up the PIXMA iP8720 to your wireless network, you must first install the software to your computer.
To begin the setup procedure on a Windows computer, insert the Setup CD-ROM into your computer.*
The setup program will start automatically. The setup instructions presented in this document describe the "Wirleless Setup Using the USB
Cable" method, whereby a USB cable is temporarily connected between the printer and computer during setup.
*If you don't have or cannot use the Setup CD-ROM, follow the steps below to start the setup.
•
Go to the IJ Setup site
• Read the Instructions on the Product Setup section, then click Download. Double-click the downloaded file
5