Setting Up Anynet; Scanning And Switching Between Anynet Devices - Samsung 450 Series 4 User Manual

Setting Up Anynet

The following settings help set the Anynet + functions.
+
To use the Anynet Function, Anynet
1. Press the TOOLS button.
Press the ENTER button to select "Anynet+(HDMI-CEC)".
Press the or button to select "Setup", then press the ENTER
2. Press the ENTER button to select "Anynet
button.
3, Press the or button to select "On", then press the ENTER
+
The "Anynet (HDMI-CEC)" function is enabled.
If you select "Off", "Anynet
+
When the "Anynet (HDMI-CEC)" function is disabled, all the Anynet
operations are deactivated.
Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
2. Press the or button to select "Auto Turn Off", then press the ENTER
3. Press the or button to select "Yes", then press the ENTER
The "Auto Turn Off" function is enabled.
If you select "No", the "Auto Turn Off" function is canceled.
Press the EXIT button to exit.
The active source on the TV remote must be set to TV to use the Anynet
If you set "Auto Turn Off" to "On", connected external devices are also turned off when the TV is turned off. If an external
device is still recording, it may or may not turn off.
Scanning and Switching between Anynet
1. Press the TOOLS button.
Press the ENTER button to select "Anynet+(HDMI-CEC)".
+
Anynet devices connected to the TV are listed.
2. Press the or button to select to a particular device and press the ENTER
button. It is switched to the selected device.
3. If you cannot find a device you want, press the
Connections", then press the ENTER
The meassage "Configuring Anynet
When searching devices completes, the connected devices are listed in the Anynet
menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected
devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV
is already on are not displayed in the device list.
In this case, select the Searching Connections menu to search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet
switch to an Anynet + device by using the TOOLS button.
+
+
(HDMI-CEC) must be set to On
+ (HDMI-CEC)", then press the ENTER
+
(HDMI-CEC)" is disabled.
or button to select "Searching
button.
+ connection..." is displayed.
English - 64
Air 28
button.
Recevier:
Connect Recorder
Setup
button.
Move
+
related
Anynet+ (HDMI-CEC)
Auto Turn Off
Searching Connections
Move
button.
Anynet+ (HDMI-CEC)
button.
Auto Turn Off
Searching Connections
Move
+ function.
+ Devices
Air 28
Recevier:
Connect Recorder
Setup
Move
+
Anynet+ (HDMI-CEC)
Auto Turn Off
Searching Connections
Move
On
Enter Return
Anynet+ Setup
: Off
Off
: Off
On
Enter Return
Anynet+ Setup
: On
: Off
No
Yes
Enter Return
On
Enter Return
Anynet+ Setup
: On
: Yes
Enter Return
+ function. Make sure to