Samsung 450 Series 4 User Manual page 34

Temporary image retention may occur when viewing a static image on the set
for more than two hours.
After selecting "Zoom1", "Zoom2" or "Wide Fit":
Press the or button to select "Position", then press the ENTER
button. Press the or
Reset: Press the or
button. You can initialize the setting.
After selecting "Just Scan" in HDMI (1080i) or Component (1080i) mode:
Press the or button to select "H-Position" or "V-Position", then press the
ENTER button.
Press the or button to adjust the screen Position. Press the
ENTER button.
Reset: Press the or
button. You can initialize the setting.
HD (High Definition)
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
Input Source
TV, Video, S-Video,
Component (480i, 480p)
DTV(1080i), Component (1080i), HDMI
(720p, 1080i)
PC
O
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
16:9
16:9
Sets the picture to 16:9 wide mode.
Wide Fit U Move
Wide Fit
Enlarges the aspect ratio of the picture
to fit the entire screen.
button to move the picture up and down.
button to select "Reset", then press the ENTER
button to select "Reset", then press the ENTER
Picture Size
16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit, Just Scan
16:9, 4:3
Zoom1 U Move
Zoom1
Magnifies the size of the picture on the
screen.
4:3
Sets the picture to 4:3 normal mode.
English - 32
TV
TV
TV
Zoom2
Magnifies the size of the picture more
than "Zoom1".
4:3
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i) or
DTV (1080i) signals are input.
Size
16 : 9
Zoom1
Position Reset
Zoom2
Wide Fit
4 : 3
Just Scan
Adjust Enter Return
Size
16 : 9
Zoom1
Zoom2
Wide Fit
4 : 3
Just Scan
Move Enter Return
Just Scan
H-Position 0
V-Position 0
Reset
Move Enter Return
Zoom2 U Move
Just Scan