Tenda P200 User Manual page 26


Traffic Type: data type. The"Ipv4 Precedence" in entry 1 on the above
screen

Value: Indicates a value set for or to assign to a corresponding QoS
entry. "None" indicates no set value. For example, with entry 1
activated, the ToS value of "0" in packets indicates priority level of 3
(highest priority); namely, packets carrying the ToS value of "0" will be
prioritized. The Value is configurable. To change it, simply double click
on it. However, if you are not sure of which values are valid for such
data, we recommend you not to make any changes thereon,
particularly QoS entries created using the "Quick Setup" feature. As any
change on such value may deactivate the corresponding functionality.

Add: Click it to add a MAC/IP based priority entry.

Prio: Short for Priority. Select a number from the drop-down list. To set
highest priority level, select "3".

Traffic Type: Select MAC address or IPv4 address from the drop-down
list.

Value: MAC address must be entered in the form of xx:xx:xx:xx:xx:xx
(for example: 00:12:34:56:78:9a) while IP address must be in the form
of yyy.yyy.yyy.yyy (for example: 192.168.0.100).
For example: to set data carrying the IP address of 192.168.1.100 to the
priority level of 2, config as seen below:
P200 200Mbps PowerLine Mini Adapter
22