8
asseMblInG anD PRePaRInG
Installing the Monitor
assembling the stand
1
stand body
2
stand base
3
CaUTIon
To protect the screen from scratches, cover
y
the surface with a soft cloth.
Illustrations in this document represent typi-
y
cal procedures, so they may look different
from the actual product.
When tightening the screws after mounting
y
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Other-
wise, the product may fall, causing personal
injury or damage to the product.
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Do not carry the monitor upside down by just
y
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
noTe
You can disassemble the stand in the
y
reverse order of the assembly.