Low Battery; Contact Screen Programming - Lancaster 7-LXDAN-1 Installation, Operating And Service Manual

STEP 5
RETURN TO NORMAL MODE
A non-rechargeable coin cell battery is located on the circuit board, used only to maintain the time of day during power
outages (all other information will be stored in memory no matter how long the power outage). The screen displays LOW
BATTERY when the battery needs to be replaced. The screen will remain illuminated solid blue when LOW BATTERY is
displayed. Initially LOW BATTERY display will alternate with the User display, finally displaying only LOW BATTERY. User
displays are still accessible by pressing
STEP 1
STEP 2
STEP 3
STEP 5 – Next Regeneration Time (minutes): Set the minutes of day for backwash using
or buttons. Press
previous step.

LOW BATTERY

.
NEXT

CONTACT SCREEN PROGRAMMING

STEP 1 - Press and
NEXT
Settings.
STEP 2 - Press to go to step 3.
NEXT
From Step 3, while hour is flashing, press and hold both the
change phone number and banner text.
Phone Number - Set phone number using the
to the next digit. Press
REGEN
Banner Text - Set the banner text up to a maximum of 44 characters. Use the
to select letters of the alphabet, numbers, ampersand (&), or a space in the banner text.
Press to forward to the next character or to exit the Installer Display Settings.
NEXT
to return to normal operation. Press
NEXT
simultaneously for 3 seconds to access Installer Display
to return to previous digit.
PAGE 10
to return to
REGEN
and
CLOCK
or arrow. Press
NEXT
button to
to forward
or