Special Functions; Control Lock; Clean Washer; My Cycle - Kenmore 796.4128 Use & Care Manual

SPECIAL FUNCTIONS
CONTROL LOCI(
I ] Use this option to disable the controls.
#_ Extra Rinse j The -washer can only be locked during
Control Lock
J_ a
cycle. This feature can prevent
children from changing cycles or
operating the machine. Once set, the controls remain Ic,cked
and must be turned OFF before the controls can be used
again. Once the washer has shut off, the power button will
allow the machine to be turned ON, but the controls will still
be locked. When the controls are locked, the DELAYSTART
LED will illuminate and "CL" will display alternately with the
estimated time remaining.
Pressand hold the EXTRA RINSE button for five seconds to
activate or deactivate the controls.
CLEAN WASHER
!_ CleanWasher 1 Detergent residuecan build up in the
Stay Fresh
j wash drum over time and can lead to a
mildewy or musty,smell The CLEAN
WASHER cycle is s_ially designed to
remove thisbuildup using bleach or another cleaner designed
specifically for cleaning front toad washers. Runthe CLEAN
WASHER cycle once a month, or more often under heavy use
conditions or if odor ispresent. S ee complete instructions i n the
CARE AND CLEANING section.
O
TurnON the washer and pressthe CLEAN WASHER
button. Selecting any other cycle after CLEAN WASHER
has been selected will cause the CLEAN WASHER cycle
to be cancelled.
O Fill the bleach the MAX line with
dispenser to
liquid
chlorine bleach. Do not overfill the bleach dispenser.
Overfilling will cause the bleach to dispense immediately.
NOTE: For other drum cleaning products, follow
the cleaner manufacturer's instructions and
recommendations. For powdered cleaning products,
add the cleaner to the main wash compartment of
the dispenser drawer. Place tablet cleaners directly
into the drum.
Pressthe START/PAUSE button to start the cycle.
After the cycle has ended, keep the door ajar. This will
promote air circulation and allow the interior of the
machine to dr'/. To use this feature, close the door just
until it contacts the door magnet.
NOTE: Do NOT use this cycle with clothes, and do
NOT add detergent or fabric softener.
MY CYCLE
/ MY CYCLE aflows you to store a
®_ My
Cycle J customized wash cycle for future use.
It allows you to save favorite
temperature, spin speed, soil level, and
other options for a cycle, and then recall them at the touch
of a button.
NOTE: You can only save a setting for one cycle at a
time. Pressing and holding the MY CYCLE button will
overwrite any previously saved cycle.
To save a MY CYCLE:
O Pressthe POWER button to turn on the washer.
O
O
O
O
Turn the cycle selector knob to select the desired cycle.
Press the CYCLE MODIFIER bbeton to change the desired settlng.
Press the CYCLE OPTION button to add the desired options.
Press and hold the MY CYCLE button.
To recall a MY CYCLE:
O Pressthe POWER button the washer.
to
turn
on
O Press the MY CYCLE 6Jtton. Thestored wiff be
settings
displayed.
O Press the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted the same as any
other cycle. However, once any other button is pressed,
the LED will turn off indicating that the settings are no
longer those of your saved cycle.
AUTO SOAK
[ I Use the AUTO SOAK option to
_ Ste_m °_ea_ presoak garments to help remove
Auto Soak
difficult spots or stains on fabric.
This option provides a 30 minute
presoak prior to the start of the selected cycle. At the
end of the presoak time, the selected cycle will use the
same water.
To use the AUTO SOAK feature, press and hold the
STEAM TREAT button for five seconds.
STAY FRESH
l 1 The STAYFRESHoption helps keep
_ CleanWasher wrinkles from setting in clothes if they
Stay
Fresh J are not removed from the washer as
soon as the cycle is complete. The
STAYFRESHoption will tumble clothes intermittentlythrough
the drum for up to eight hours.
To select the STAYFRESHoption, press and hold the CLEAN
WASHER button for approximately five seconds. Press the
POWER button or the START/PAUSEbutton to remove
clothes at any time.
23