Samsung 460 Installation Manual page 12

Menu Item
CAS
Self
Diagnosis
PI AES Data
Self
Diagnosis
for TV
Service
Self
Diagnosis for
HTV
Upgrade
Now
Service
Pattern
ATV Cable
AGC Gain
DTV Cable
AGC Gain
TV reset
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server
product for more operating information.
12
English
initial Value
Configures CAS support. Applies to only the NB673, NB677, and NB678 models.
OFF : Turns off CAS support.
Pro:idiom
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
Enter Self Diagnosis Menu.
y Picture Test: Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen.
y Sound Test: Use the built-in melody to check for sound problems. If the problem occurs
during the test, select YES, and then follow the directions on the screen.
0xD279
Displays the current state of Pro:Idion AES
Lets you check the state of the TV picture and sound.
y Picture Test : Use to check for picture problems. If the problem appears in the test
picture, select YES, and then follow the directions on the screen.
y Sound Test : Use to check for sound problems. If the problem occurs during the test,
select YES, and then follow the directions on the screen.
Lets you check the state of Pro:Idiom and its communication with the SI STB
or SBB. If you have any problems with the Pro:idiom encryption channel or the
communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom
DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel
has failed to play content, first check the broadcasting systems related to Pro:Idiom
encryption. If your broadcasting system does not have a problem, contact Samsung
Service. If STB SI Vendor Setting appears to have failed and communication with the
SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does
not have a problem, contact to Samsung Service.
Lets you upgrade the TV SW with a USB memory stick. See Page 31.
Lets you check the state of the TV picture by displaying picture test patterns. Press the
32GRAY
Menu button to turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default
Default
value unless problems occur.
Lets you control the AGC gain of the digital cable channels. Don't change the default
Default
value unless problems occur.
Returns all settings on the TV to their factory defaults.
Description