Operating Your Appliance; Mcwc50Dstf: Wine Cooler; Mcbc58Dstf: Beverage Cooler - Magic Chef MCWC50DSTF User Manual

OPERATING YOUR APPLIANCE

MCWC50DSTF: Wine Cooler


The temperature range of the wine cooler is for 39° F ~
64° F (4° C ~ 18° C) +/- 5° F.

Temperature Recommendations:
Red Wine:
White Wine:

The display indicates the average temperature of the appliance at the moment.
Pre-Set Wine Zones

Press the "RED" or "WHITE" pads to choose preset storage conditions for either red or white wine.
(The indicator light "RED" or "WHITE" will illuminate accordingly.)

The programmed temperature for red or white wine will be displayed for a few seconds.
Manual Temperature Setting

The temperature of the wine cooler can be set anywhere between 39° F ~ 64° F (4° C ~ 18° C) by
pressing temperature up ▲ and temperature down ▼pads as follows:
1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds).
2) Press the ▲▼ pads to increase or decrease the desired temperature in increments of
one degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:

To select temperature display between Celsius (° C) or Fahrenheit (° F), press the "▲" pad for
approximately 2 seconds.

MCBC58DSTF: Beverage Cooler


The temperature range of the beverage cooler is for 35° F
~ 54° F (2° C ~ 12° C). +/- 5° F.

The display indicates the average temperature of the
appliance at the moment.
NORMAL Temperature Setting

When the appliance is switched on, or the "NORMAL" pad is pressed, the appliance runs on the
temperature setting of 45°F (7°C) and the "NORMAL" indicator light will be illuminated.
Manual Temperature Setting

The temperature of the beverage cooler can be set anywhere between 35° F ~ 54° F (2° C ~ 12° C)
by pressing temperature up ▲ and temperature down ▼pads as follows:
1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds).
2) Press the ▲▼ pads to increase or decrease the desired temperature in increments of
one degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:

The "MANUAL" indicator light will be illuminated while you are manually setting the temperature
on the beverage cooler.

To select temperature display between Celsius (° C) or Fahrenheit (° F), press the "▲" pad for
approximately 2 seconds.
The following is applicable to both MCWC50DSTF and MCBC58DSTF:

The indicator will remain ON during refrigeration cycle and will be OFF during
idle cycle.

To switch the Interior light ON/OFF, press the
54° F ~ 61° F (12° C ~ 16° C)
43° F ~ 50° F (6° C ~ 10° C)
pad.
8