Operating Your Appliance; Hmwc50St: Wine Cooler; Hmbc58St: Beverage Cooler - Magic Chef HMWC50ST User Manual

OPERATING YOUR APPLIANCE

HMWC50ST: Wine Cooler

 The temperature range of the wine cooler
is for 41°F ~ 64°F (5°C ~ 18°C) +/- 5°F.
 Temperature Recommendations:
Red Wine:
White Wine:
 The display indicates the average temperature of the appliance at the moment.
Pre-Set Wine Zones
 Press the ▲ or ▼ pads to choose preset storage conditions for either red or white wine. (The
indicator light "Red" or "White" will illuminate accordingly.)
 The programmed temperature for red or white wine will be displayed for a few seconds.
Manual Temperature Setting
 The temperature of the wine cooler can be set anywhere between 41°F ~ 64°F (5°C ~ 18°C) by
pressing temperature up▲ and temperature down ▼ pads as follows:
1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds).
2) Press the ▲▼ pads to increase or decrease the desired temperature in
increments of one degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:
 To select temperature display between Celsius (°C) or Fahrenheit (°F), press the ▲ pad for
approximately 2 seconds.

HMBC58ST: Beverage Cooler


The temperature range of the beverage cooler
is for 37°F ~ 54°F (3°C ~ 12°C). +/- 5°F.
 The display indicates the average temperature
of the appliance at the moment.
NORMAL Temperature Setting
 When the appliance is switched on, or the ▲pad is pressed, the appliance runs on the
temperature setting of 45°F (7°C) .
Manual Temperature Setting
 The temperature of the beverage cooler can be set anywhere between 37°F ~ 54°F (3°C ~ 12°C)
by pressing temperature up ▲ and temperature down▼ pads as follows:
1) Press the [SET] pad until you hear a "Beep" sound (approximately 2 seconds).
2) Press the ▲▼pads to increase or decrease the desired temperature in increments of one
degree.
3) Press the [SET] pad to confirm your desired temperature setting. If no pad is pressed
within 10 seconds, your select temperature setting will be automatically confirmed.
NOTE:
 To select temperature display between Celsius (°C) or Fahrenheit (°F), press the ▲ pad for
approximately 2 seconds.*
The following is applicable to both HMWC50ST and HMBC58ST:
 The indicator will remain ON during refrigeration cycle and will be OFF
during idle cycle.
 To switch the Interior light ON/OFF, press the
54°F ~ 61°F (12°C ~ 16°C)
43°F ~ 50°F (6°C ~ 10°C)
pad.
9