Operation And Controls - Fisher F19 Owner's Manual

OPERATION & CONTROLS
POWERING UP
• Click the left knob to turn the detector ON.
• After clicking the knob on, continued clockwise rotation will increase the
"sensitivity" in DISC Mode or the "GAIN" in ALL METAL Mode.
• We suggest keeping the GAIN below 70 until you become familiar with
the detector's operation.
ON/OFF/GAIN:
• Click ON/OFF
• In DISC Mode rotate
to change GAIN
(sensitivity) from
1 to 100
• In ALL METAL Mode
rotate to change
GAIN from 5 to 100
in steps of 5
12
• In DISC Mode press
to cycle through
menu options
• In ALL METAL Mode
press-and-hold
while bobbing coil
to set ground balance
Press-and-hold to
activate PINPOINT feature
Change setting of active menu option
In ALL METAL Mode:
Change Ground Balance setting from 0 to 99.9
VOLUME
V-BREAK
NOTCH WIDTH
DISCGND BAL
In DISC Mode:
MODE SELECTION
and THRESHOLD CONTROL
• Click left to operate
in Discrimination
Mode
• Click to right to
operate in ALL METAL
Mode.
• Rotate knob in
ALL METAL Mode to
change THRESHOLD from
-40 to 40