Arbortech POWER CHISEL Owner's Instruction Manual page 7

Mounting plate
rm
1. Remove the Power Chisel from its box. Inspect
to ensure that no damage has occurred during
shipping. If damaged, report to the retailer imme-
diately.
2. The Power Chisel is packaged with two acces-
sory chisels. Remove a chisel from the box, wipe
off the sticky coating and insert into the exten-
sion arm as shown in fig:1. When the chisel is
inserted correctly it should snap firmly into place.
The bevel of the chisel should fall away from the
tool body.
3. Before plugging in, ensure that the on/off
switch is in the OFF position (Fig.2).
* Place 2 to 3 drops of oil in the lubrication port
as shown in fig.3 using the 15ml oil bottle sup-
plied.
* Wipe off the sticky coating on the chisels
before using.
KNOWING YOUR TOOL (cont'd) 6
Tool body
Chisel bevel
Unpacking and ssembly
Fig.3
Chisel
Clamping groove
Fig.1
Fig.2