Installing On A Wall - LG 47LV35A Owner's Manual

8
ASSEMBLING AND PREPARING

Installing on a Wall

To install the Monitor on a wall (optional),
use the VESA screws provided as accessories to
fasten it.
10 cm
IInstall the monitor at least 10 cm away from the
wall and leave about 20 cm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
NOTE
Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
10 cm
20 cm
10 cm
10 cm
CAUTION
Disconnect the power cord first, and then
y y
move or install the monitor set. Otherwise
electric shock may occur.
If you install the monitor set on a ceiling or
y y
slanted wall, it may fall and result in severe
injury.
Do not over tighten the screws as this may
y y
cause damage to the monitor set and void
your warranty.
Use the screws and wall mounts that meet
y y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
To prevent injury, this apparatus must be
y y
securely attached to the wall in accordance
with the instrallation instructions. (This
pertains to Australia and New Zealand only.)