Getting Started; Charging The Battery; Installing The Battery - Tetra MTH650 Basic User's Manual

Getting Started

Charging the Battery

Motorola approved chargers provide optimum performance. Other
chargers may not fully charge your Motorola battery or may reduce
the life of the battery.
The MTH650 can be either On or Off during charging.
1. Insert the connector on the charger into the socket at the base of
the MTH650. Select the required plug adapter (UK or European
type) and connect to the charger. Then plug the charger into a
suitable mains socket.
2. The MTH650 displays the Charger Connected message only if
the MTH650 is On when connecting the charger. The Battery icon
shows the charging status (see below).
Empty
Battery Capacity

Installing the Battery

1. Remove the battery cover as shown below.
2. Insert the battery top into the compartment as illustrated on the
battery.
3. Carefully press the battery silver bottom downward until it clicks
into place.
4. Replace battery cover.
16
Empty
Full
Battery Charge Progress
Full