Page 1
For the latest instruction manual updates and information on the entire Kam range visit: www kam co uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
Page 2
Brown = Live This appliance must be earthed. Fuses KBA8: AC110V = T4A/250V / AC230V = T2A/250V KBA10: AC110V = T6.35A/250V / AC230V = T3.15A/250V KBA12: AC110V = T10A/250V / AC230V = T5A/250V KBA15: AC110V = T15A/250V / AC230V = T8A/250V...
Page 3
Connections Connect the output of a pre-amplifier or mixer to the jack inputs. The input signal should be of line level. The maximum output power is obtained when connecting 4 ohm speakers. It is also possible to connect 8 ohm speakers; however, the output power will slightly decrease in this case. The speakers must have a power rating higher than the output of the amplifier.
Page 4
Technical specifications Kam KBA8 power amplifier Output power @ 4 Ohms: 2 x 120w Voltage: 115/230V 50/60Hz S/N: ≥95dB Frequency response: 10Hz-20KHz Input sensitivity: 1.228V THD(1KHz/50W): ≤0.1% Protection: Overload / Neutral / Delayed On Kam KBA10 power amplifier Output power @ 4 Ohms: 2 x 180w Voltage: 115/230V 50/60Hz S/N: ≥95dB...