Table of Contents
Advertisement
HOW TO USE THE M~UTE/SECOm T~ER
The Minute/Second Timer
The Minute/Second Timer has three timing
functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch 3 and MINUTE pad (for 3 minutes and
no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
How to Defrost, Hold and Time Cook
Let's say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and Place in oven.
Step
TIME
DEFROST pad.
DEFROST
Step
MINUTE pad for 15 minutes
MINUTE
defrosting time. (Defrosting is
automatically set on power level
3 but can be changed by touching
the POWER LEVEL pad and the
desired power level.)
Touch TIME
2:
Touch pads 1,5 and
3:
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from one
second to 99 minutes and 99 seconds. A holding
or standing time may be found in some of your
own recipes or in a cookbook.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch either TIME COOK I & II, TEMP COOK &
HOLD or AUTO ROAST and enter cook time,
temperature or code. Touch MIN/SEC TIMER and
enter number of minutes to delay cooking. When
delaying Temp Cook & Hold or Auto Roast
cooking, be sure probe is in food. Touch START.
Timer will count down to zero and cooking will begin.
Step 4: Set standing or hold time
MI N/SEC
by touching MIN/SEC TIMER
TIMER
pad.
Step 5: Touch 1,0 and MINUTE pad to hold for
ten minutes.
Step 6: Touch TIME
I
I
TIME COOK
COOK I &II pad.
I &II
and MINUTE pad for 25 minutes
Step 7: Touch 2,5
of cooking time.
Step 8: Touch START. As
each function is automatically
START
performed, oven display shows
instructions entered and the
function. When time is up, the
oven signals and flashes "End."
11
Advertisement
Table of Contents
