Installing Memory - Lenovo ThinkCentre 8700 User Manual

Installing memory

Your computer has two connectors for installing dual inline memory modules
(DIMMs) that provide up to a maximum of 4.0 GB of system memory.
When installing memory modules, the following rules apply:
v Use 1.8 V, 240-pin double data rate 2 synchronous dynamic random access
v Use 256 MB, 512 MB, 1.0 GB, or 2.0 GB memory modules in any combination up
To install a memory module:
1. Remove the computer cover. See "Removing the cover" on page 20.
2. Locate the memory connectors. See "Identifying parts on the system board" on
3. Open the retaining clips.
4. Make sure that the notch 1 on the memory module aligns correctly with the
memory (DDR2 SDRAM).
to a maximum of 4.0 GB.
page 22.
connector key 2 on the system board. Push the memory module straight
down into the connector until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 37.
Chapter 3. Installing options
25