Table of Contents
Advertisement
Troubleshooting
7) If the Main Board is changed, Press the ▼ ▲ (Up or Down) button to move to DMD → Digital, then press ENTER to select.
8) Then Press ENTER to save CCA information to the Main board
＊ Attention
Performing CCA is independent on current display's resolution and input signal type if you don't measure color coordinates data.
Measuring color coordinates data requires specific equipment not possessed by service personnel, that makes performing manual
adjustment impossible. Adjusting CCA is applied to all the signal mode.
Don't change desired value because it will be harmful to the color of the SET.
4-24
Samsung Electronics
Hide quick links:
Advertisement
Table of Contents
