Installation & Connection; Protect Status - Samsung HL67A750A1FXZA Service Manual

Dlp tv
Hide thumbs Also See for HL67A750A1FXZA:
Table of Contents

Advertisement

■ Installation & Connection
●: Light is On
◑: Light is Blinking
○: Light is Off
TIMER
LED
■ Protect Status
1. Attempting to turn the LED ASSY on fails repeatedly
If turning the LED on fails, the set automatically tries turning the LED ASSY on 3 times. If all attempts fail, all LED's on the front
panel will blink. Check the LED ASSY, LED Driver and the Sub power or SMPS and replace them if necesscary.
Samsung Electronics
STAND BY/
TEMP
Standby state.
The picture will automatically appear in about 15 seconds.
Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.
A cooling fan inside the set is not operating normally.
The inner Power Signal on the main board may be short or opened. Please contact a certified
technician.
LED may be defective. Please contact a certified technician.
Indication
Troubleshooting
4-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl61a750a1fxzaHl61a750a1fHl67a750a1f

Table of Contents