Resonessence INVICTA User Manual page 15

Appendix A
Installing the Thesycon USB
Audio 2.0 Driver
Resonessence provides a driver
from Thesycon specifically configured
for the INVICTA. The driver is provided
in a ZIP file called
"Resonessence_USB_Driver.zip"
and is available from our WWW Site)*
To install this USB Audio 2.0
driver on your Windows PC, begin by
copying the file from the SD Card to your
PC internal drive and unzipping the
contents to a temporary directory.
Follow these steps to complete the
installation:
1. Configure the INVICTA for USB
Audio 2.0 operation as described
in the User Settings section of
this document and set the data
source to be USB Audio.
2. Plug the INVICTA into a High
Speed (USB 2.0) port of your
Windows 7 PC. (Windows will not
search for the driver since it
recognizes that INVICTA is an
Audio 2.0 device.)
3. Run the "setup.exe" file in the
unzipped directory.
* Please check for the latest instructions and the driver file from the website:
http://resonessencelabs.com/resonessence-generic-thesycon-usb-audio-2-0/
4. Follow the instructions to ensure
that the INVICTA is plugged in and
choose "Next":
5. Install the driver software: