Table of Contents
Advertisement
Quick Links
2 Port DVI Splitter
Model #: SPLIT-DVI-2
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com
1
Advertisement
Table of Contents
Related Manuals for Avenview SPLIT-DVI-2
Summary of Contents for Avenview SPLIT-DVI-2
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
Table of Contents Section 1: Getting Started ........................3 Important Safeguards ......................3 Safety Instructions ......................... 3 Regulatory Notices Federal Communications Commission (FCC) ......... 4 Introduction ........................... 4 Package Contents ........................4 Before Installation........................5 Installation ..........................6 Section 2: Specifications ......................... 7 2.1 Connector Pin Assignment ...................... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview SPLIT-DVI-2, 2 Port DVI Splitter, has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the SPLIT-DVI-2 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Introduction Avenview SPLIT-DVI-2 Distribution System lets your one digital video signal (Set-Top boxes, DVD Player or PC) with DVI output and distributes it to two or more digital displays such as PC Monitor, HDTV, or Projector. Supports both PC Monitor and HDTV display by function switch... -
Page 5: Before Installation
Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. -
Page 6: Installation
1. Power off display source such as DVD Player, Set-top box 2. Connect the DVI cable into each display source and display 3. Connect DVI cable which is attached to display source into SPLIT-DVI-2 4. Connect Power to SPLIT-DVI-2 5. For HDTV Signal select HDTV from Function Switch and for PC Signal select PC... -
Page 7: Section 2: Specifications
Section 2: Specifications Item Description Units SPLIT-DVI-2 Unit Description 2 Port DVI Splitter DVI Version HDCP Compliance Clock Frequency 25MHz – 225 MHz Supported Resolution & Up to WUXGA 1920 x 1200 Distance DVI Connector 29 pin DVI-D Plug Dimensions (L x W x H) 3.7”... -
Page 8: 2.1 Connector Pin Assignment
2.1 Connector Pin Assignment TRANSMITTER Signal Assignment Signal Assignment Signal Assignment T.M.D.S. Data2- T.M.D.S. Data1- T.M.D.S. Data0- T.M.D.S. Data2+ T.M.D.S. Data1+ T.M.D.S. Data0+ T.M.D.S. Data2 Shield T.M.D.S. Data1 Shield T.M.D.S. Data0 Shield No Connect No Connect No Connect No Connect No Connect No Connect +5V Power... - Page 9 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the SPLIT-DVI-2 and is the answer not in the manual?
Questions and answers