Advertisement
TIP: If you are under the age of 14, it is recommended you ask an adult for help for the following steps:
7C
Hold the fully-assembled chassis in your hand
and turn it upside down to find 4 small holes near
the edges of the chassis and near the 4 wheels.
Align the holes on the chassis with the holes on
the car top body (see 7C).
7D
Use a screwdriver (not included) to attach the
body to the chassis using the set of 4 small
screws (part H), and make sure the screws are
entered straight into the chassis. Do not tighten
the screws until all screws are partially entered
into the chassis. Drive the screws into the chassis
until no gaps are left between the body and the
chassis. Ask an adult to help fasten the screws as
this requires some force. To ease this process,
you can add a tiny amount of petroleum jelly (not
included) inside the screw mounts.
Step 8
Applying the "H " sticker on the front hood of the car body
2
8A
Position the car on a flat surface, with the front
of the car facing you. Remove the sticker from
its backing and position it according to the
picture (see 8A).
8B
There should be about 1 mm between
each side of the sticker and the blue
stripes on the car body, and the
sticker should be placed in the center
of the front hood (see 8B).
Advertisement
