Standard Horizon PF-P320 Service Manual page 8

2. Operation Overview
8. Mode select button in memory mode has
four modes ;
- 1st stopper input mode
- 2nd stopper input mode
- Memory 1 memory mode
- Memory 2 memory mode
- Stopper can be moved to set position with
number entry keys in stopper input modes.
For example, when required measurement is
132.5 mm, input 1325 with number entry
keys.
- Input mode will be switched automatically
from 1st stopper input mode to 2nd stopper
input mode. (Modes will not be switched in
the case of single mode.)
Display will be switched to counter mode
after required measurement of 2nd stopper is
input.
- When only 2nd stopper input is required,
press mode select button twice, and 2nd
stopper input mode will appear.
9. Memory mode
- If mode select button is pressed three
times, mode will be switched to memory 1
mode. If mode select button is pressed four
times, mode will be switched to memory 2
mode.
- If memory bouton is pressed with memory
mode, stopper position will be displayed and
input and monitor will be switched to
counter mode automatically.
- Press mode select button once to read
memory 1 ; press button twice to read
memory 2.
"XXX.X
"XXX.X Set Stopper 2"
"Memory 1 Press MEMORY"
"Memory 2 Press MEMORY"
"XXX.X Set Stopper No.1"
"132.5 Set Stopper No.1"
"Stopper Set OK"
"XXX.X Set Stopper No.2"
"Memory 1 Press MEMORY"
"Memory 1 Please wait."
"XXX.X XXX.X Memory 1"
"Memory 2 Please wait."
"XXX.X XXX.X Memory 2"
(3)
Set Stopper 1"
"0 / 0"
"0 / 0"