Electronic Speed Control - Traxxas Slash 58034-2 Owner's Manual

XL-5 Wiring Diagram
10 • SLASH
TRAXXAS TQ 2.4GHz RADIO SYSTEM
Your model is equipped with the Traxxas TQ 2.4GHz transmitter.
The transmitter has two channels: Channel one operates the
steering, and channel two operates the throttle. The receiver
inside the model has three output channels. Your model is
equipped with one servo and an electronic speed control.
TRAnSMITTER AnD REcEIvER
Red/Green Status LED
Set Button
Steering
Trim
Park/Drive
Switch
Throttle
Trigger
Power Switch Battery Compartment
MODEL wIRInG DIAGRAM
Sound Control
Steering Wheel
Antenna
Receiver
Steering Servo
Channel 1
XL-5 ELEcTROnIc SpEED cOnTROL
Traxxas High-Current
Connector (Male)
to Battery
Motor
(Titan 12T)
®
Module
to Sound Output
Modules on body
(see page 18)
XL-5 Electronic
Speed Control
to Sound Control Module
CH3 - Shift Channel
Traxxas High-Current
Green Connector
Connector (Male)
CH2 - ESC Signal Out
Gray Connector
CH1 - Steering Servo
CH1 - Channel 1
Not used
To Motor
LED
to Battery
Set Button