Samsung S24C650BW User Manual page 23

1
Preparations
Icons
AUTO
Key Guide
Use this button to control the brightness and contrast of the screen.
When OSD is not on the screen, push the button to adjust the

Volume in Analog
the [IN] port.
When OSD is not on the screen,push the button to adjust the

Volume in DisplayPort
Applicable to the models that have speakers only.

Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Analog
the product or change the input source by pressing the [
message that shows the changed input source will appear at the top left
corner of the screen.
Press the [ ] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the

Auto Adjustment
This function is only available in

Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
Description
/ DVI mode if a stereo cable is connected to
mode.
/ DVI / DisplayPort). If you power on
function.
Analog mode.
1 Preparations
] button, a
23