Waring TMP150 SERIES User Manual page 9

4. Attach the tomato screen
to the threaded end of the
feed chute opening so that
the tabs on the large end
are aligned with the slots
on the feed chute opening.
NOTE: They will not fit
securely together until
the ring nut has been
properly secured on.
Screw the ring nut onto
the threaded end of the
feed chute to secure
the tomato screen in
place. Due to the spring,
a little pressure may be
needed to secure the
ring nut into place.
To ensure that this step has
been done properly, check to
see that the tomato screen will not rotate. If it does rotate, the
tabs are not properly aligned and the machine will not operate
properly. If this occurs, simply unscrew the ring nut and align
the tabs.
5. Insert the feed chute into
the main housing. Secure
it from right to left until it
clicks into place and is
upright.
9