Waring TMP150 SERIES User Manual page 7

4. Insert the
auger and
drive coupling
assembly into
the opening
of the feed
chute.
5. Attach the tomato screen to
the threaded end of the feed
chute opening so that the
tabs on the large end are
aligned with the slots on
the feed chute opening.
NOTE: They will not fit
securely together until the
ring nut has been properly
secured on. Screw the ring
nut onto the threaded end of the feed chute to secure the
tomato screen in place. Due to the spring, a little pressure may
be needed to secure the ring nut into place.
To ensure that this step has been
done properly, check to see that
the tomato screen will not rotate.
If it does rotate, the tabs are not
properly lined up and the
machine will not operate properly.
If this occurs, simply unscrew the
ring nut and line up the tabs.
6. Insert the hopper into the top
of the feed chute.
7