Advertisement
8.WARRANTY
1. WARRANTY REGISTRATION CARD
To obtain Warranty Service, the buyer should first fill out and return the encl-
osed Warranty Registration Card within 10 days of the Purchase Date.All the
information presented in this Warranty Registration Card gives the manuf-
acturer a better understanding of the sales status, so as to purport a more
effective and efficient after-sales warranty service. Please fill out all the infor-
mation carefully and genuinely, miswriting or absence of this card will void your
warranty service.
2. RETURN NOTICE
2.1 I n case of return for any warranty service, please make sure that the pr-
oduct is well packed in its original shipping carton, and it can protect your
unit from any other extra damage.
2.2 Please provide a copy of your sales receipt or other proof of purchase with
the returned machine, and give detail
2.3 A brief description of the defect will be appreciated.
2.4 Please prepay all the costs involved in the return shipping, handling and
insurance.
3. TERMS AND CONDITIONS
3.1
LTO
warrants that this product will be free from any defects in mat-
erials and/or workmanship for a period of 1 year from the purchase date if
you have completed the Warranty Registration Card in time.
3.2 The warranty service is only available to the original consumer, who purch-
ased this product directly from the retail dealer, and it can not be transferred.
3.3 During the warranty service,
its own option at no charge to you for parts or for labor in accordance with
the right side of this limited warranty.
3.4 This warranty does not apply to the damages to this product that
occurred as the following conditions:
Instead of operating in accordance with the user's manual thoroughly, any
abuse or misuse of this product.
Normal tear and wear.
The product has been altered or modified in any way.
Damage which may have been caused either directly or indirectly by another
3.5 In no event shall
LTO
be liable for any incidental or consequentialdamages.
Some states do not allow the exclu-sion or limitation of incidental or conse-
quential damages, so the above exclusion or limitation may not apply to you.
3.6 This warranty gives you the specific rights, and these rights are
compatible with the state laws, you may also
have other statutory rights that may vary from state to state.
8
LTO
may repair or replace this product at
IN THIS MANUAL:
1. INTRODUCTION
2. SPEAKER CABINET QUICK START
3. WIRE CONNECTIONS
4. FREQUENCY RESPONSE
5. PANEL DESCRIPTION-SR800SA
6. PANEL DESCRIPTION-SR400P
7. TECHNICAL SPECIFICATION
8. WARRANTY
1. INTRODUCTION
Thank you very much for expressing your confidence in
purchasing SR800SA + SR400P loudspeaker system. The system is
specifically designed for using in hi-quality performance site and the precise
sound reinforcement commercial place. It uses trapezium configuration which
greatly decreases the resonance of the standing wave in the cabinet and
uses hi-density matrix spray-paint technics and the bottom bracket design
which make mounting quickly and flexibly.
SR800SA + SR400P is a complete system that integrates in the same
unit loudspeakers, amplifiers and analog processor. The system includes
two different models:
- SR800SA: It's a sub-woofer mounting a 15" woofer in a vented cabinet
includes Bi-amp 400W + 400W, one for the sub-woofer , and the other one
for the full-range satellite SR400P . The standard combination with the SR400P
requires one sub for each satellite.
- SR400P: It's a passive speaker includes a 1.35" horn-loaded compression
driver and a 12" woofer in a vented cabinet. It can be used as a full-range
system or as a satellite in combination with the SR800SA.
Enjoy your SR800SA + SR400P loudspeaker system and make sure to read
this manual carefully before operation.
1
2
3
4
5
6
7
8
LTO products by
1
Advertisement
