Connect The Base; Charge The Handset; Set Up - Amplicom PowerTel 720 Assure+ User Manual

S
et UP

Set Up

Note: The Amplicom customer service toll free number has been pre-installed in
the phone book of every telephone and cannot be edited or removed.

1. Connect the base

i. Plug the power adapter into the base unit and the other end into a
wall socket. The unit should power on and the display will light up.
ii. Plug the telephone cable into the base unit
WARNING: Do not connect phone line to the phone socket yet.
2. Connect the cordless phone charger base
Plug the other power adapter that is already attached to charger base into the wall
socket and switch the power on.
3. Install the battery pack
Insert the rechargeable battery pack into the handset as shown.
Dispose of battery pack properly. Do not allow battery pack to come into contact with fire or
water.

4. Charge the handset

Place the handset on its base to charge for a minimum of 16 hours before use.
5. Connect telephone cable
After initial charge, plug the telephone cable into the telephone wall socket.
YOUR POWERTEL PHONE IS NOW READY TO USE!
10
(Optional if included)
Service Center