Table of Contents
Advertisement
Pair and connect your headset
Before using the headset, you must pair and connect it with a compatible phone.
Make sure your headset is switched off, and your phone is switched on.
1. If you have never paired the headset, or you have cleared the pairings, switch the headset on.
Otherwise, to go into pairing mode, press and hold
for 5 seconds until the green indicator light
starts to flash quickly.
2. Within 3 minutes, switch on Bluetooth on your phone, and search for Bluetooth devices. For details,
see the user guide of your phone.
3. Select your headset from the list of devices found.
4. If necessary, type in the passcode 0000.
5. When the headset is paired and connected, the green indicator light flashes every 5 seconds.
When your headset is connected to your phone, you can hear voice-guided driving directions, the
radio, or any other audio on your phone in your headset instead of the phone loudspeaker.
The next time you switch the headset on, it automatically connects to the last connected device.
You can pair your headset with 8 compatible phones, but you can only connect it to a maximum of 2
phones at the same time. With some devices, you may need to make the connection separately after
pairing.
8
© 2014 Microsoft Mobile. All rights reserved.
Advertisement
Table of Contents
