Table of Contents
Advertisement
4
The fully charged battery has power for up to 8 hours of talk time and up to 150 hours
of standby time. If you keep the earpiece in the holder, the standby time is up to 3
months.
When the battery charge is low, the headset beeps every 5 minutes, and the red
indicator light flashes. If the voice prompts are on, you also hear the battery level.
When the battery is charging, the red indicator light is on.
Check the battery charge
Make sure the headset is switched on, then press
enough power. If the light is yellow, you may need to recharge the battery soon. If
the light is red, recharge the battery.
Switch the headset on or off
Switch on
Remove the earpiece from the holder. The headset beeps, and a green indicator light
flashes.
If you've never paired the headset with a phone, or you've cleared the pairings, pairing
mode is switched on. Pair and connect the headset with your phone within 3 minutes.
If you've paired the headset before, it connects to the last phone it was used with. If
the headset can't find that phone, it tries the next phone on its list of paired devices.
If not connected to a phone within 30 minutes, the headset switches off.
Switch off
Put the earpiece back into the holder. The headset beeps, and a red indicator light
flashes once. All calls are ended.
Pair and connect the headset to your phone
Before using the headset, you must pair and connect it to a compatible phone.
1
Make sure your headset is switched off and your compatible phone is on.
2
If you've never paired the headset with a device, or you've cleared the pairings,
switch the headset on.
If you've previously paired your headset with another device, press and hold
for 5 seconds.
Pairing mode is switched on, and a blue indicator light starts to flash quickly.
. A green light means there is
Advertisement
Table of Contents
