Table of Contents
Advertisement
DRAFT 3 – JANUARY 10, 2005 NOT FOR RELEASE
Step 3
Position the GPS receiver where it has a clear view of the sky for optimal performance.
The receiver is magnetized for use with vehicle roofs.
Connecting the OrbitGPS Serial GPS Receiver Serial Powered Version
(OrbitGPS Part Number G1030) to Blackbay MC70 Vehicle Cradles
Simply, plug the RJ45 connector at the end of the GPS Receiver cable into the RJ45 port
on the back of the vehicle cradle. Note that older cradles may not have power out for the
GPS. Contact Blackbay for information on how to activate power out through the RJ45
port.
ORBITGPS USER GUIDE
8
SERIAL GPS RECEIVERS
Advertisement
Table of Contents
