Table of Contents
Advertisement
DRAFT 3 – JANUARY 10, 2005 NOT FOR RELEASE
Consult the vehicle's owner's manual for information on how to access the vehicle's power
supply.
4. Connect the male PS2-style connector on the power cable to the female PS2-style
connector on the GPS receiver cable.
If the GPS receiver has power, the orange light on the top of the receiver will be lit. (Note,
once the GPS receiver has obtained a location fix, the orange light will blink).
LED Light Status
No light – No power to GPS receiver
Light on continuously – GPS receiver has power, but has not acquired a GPS fix
Light flashing on and off – GPS receiver has power and has acquired a GPS fix
ORBITGPS USER GUIDE
10
SERIAL GPS RECEIVERS
Advertisement
Table of Contents
