Table of Contents
Advertisement
3
STEP 5
STEP 6
30
-
Extra Charge—Cost in dollars if a given period of time is exceeded.
-
Stop connection...—Check to enable dropping the connection when the
time exceeds the given time.
The window appears:
•
Previous Cumulative Time—Amount of time the 3G/4G connection has
been up since being reset.
•
Current Cumulative Time—Amount of time that has elapsed since the
device brought up a 3G/4G connection.
•
Charge—Estimated cost of the connection since the counters were reset.
Set the Diagnostic behaviors:
•
Restart count—Check and enter the day of the month to enable the
counters to be reset on that day. If the value is greater than the number of
days in the month (for example, a value of 31 in a 30-day month), the counters
are restarted on the last day of the month.
•
Self-test daily—Check and enter the time-of-day (24-hour clock) to test the
connection. A self-test is considered successful if the device can get an IP
address from the service provider. Failures are sent to the log.
•
Log self-test—Check to log all self-test activity. (All test results are sent to
the log.)
Click Save to save your settings.
Cisco RV320/RV325 Administration Guide
Setup
Setup Network
Hide quick links:
Advertisement
Table of Contents
