Intermatic ET90000 Series Installation And Programming Manual page 11

7. seleCT asTro(nomIC) Zones
If you have previously programmed an event or a
holiday based on astronomic time, you must select an
astronomic zone after you have programmed in all of
your variables, events, and holidays. Select from the
following regions:
• USA STATES
COUNTRY
• MEXICO
• CANADA
COUNTRY LOCATION
• USA
TERRITORIES
LOCATION QUADRANT
Then select the
appropriate COUNTRY
LOCATION and LOCATION QUADRANT.
TIps on plannInG eVenTs
Depending on how complex your circuits are, you may
prefer to plan your events before programming using a
table similar to the one at the right.
ET90000 Series Electronic Timer
SELECT ASTRO ZONE
UNITED STATES
ILLINOIS
CENTER
8. reVIeW your eVenT
After you finish programming your events, you can
choose YES to review it. Review the program by circuit,
by event (ALL, HOLIDAY, or RELATIVE) and by specific
date. If the event requires changes, press ENTER with
the event highlighted to proceed directly to Advanced
Options. You can also edit or change your event from
ADVANCED OPTIONS on the SETUP screen.
eVenTs
event effective
Circuit(s) name days
holIdays
name of begin
Circuit(s) holiday date
11
Type:
start on/off
Time fIxed/pulse
Type:
end on/off
date fIxed/pulse