Connecting Power Cable - Viola Systems Arctic AMR Hardware Manual

Hardware Manual
Arctic AMR Hardware Manual

3.3 Connecting power cable

Warning!
If the device has already been powered, wait for 5 minutes after all the LEDs
have been disabled before opening the device.
■
When the device is opened, connect phase and neutral cables to power
connector. Power connector is show in figure 6.
Figure 6. Power connector
■
Insert cable shield on top of SIM card holder (see figure 7 and 8).
■
Insert cable to device via cable gland. Tighten the cable gland.
Note!
Install SIM card and cable shield before connecting power cabling.
Warning!
Device must not be operated without cable shield and cable clamp securely
connected.
Firmware Version 1.x 15 Document Version 1.1