Through the correct module address (default address:http://192.168.16.254/ser2net.asp),you can
access to the WEB configuration page.
The page can be divided into 3 areas:
1 Network configuration area
2 Serial function configuration areas
3 Configuration submit area
5.1
WEB network configuration
Net mode selection:
Default – default work mode
ETH-SERIAL – Serial to Ethernet
WIFI (CLIENT)-SERIAL – serial to WIFI CLIENT
WIFI (AP)-SERIAL) – Serial to WIFI AP
Choose different work mode,the web will show you different page.Mode configuration page
is as follows:
Hi-Link (HK)Co.,Ltd
Http://www.hlktech.net
Chart 7.WEB configuration page
sky:hlktech
Tel:0755-23152658-821
16