Preparation; Attaching The Stand - Sharp Aquos LC-32D33X Operation Manual

Preparation

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the screws supplied with the TV.
1
Screws ( g 4)
(used in step 3)
Attach the supporting post for the stand unit
2
onto the base as shown below.
Screw
6
32D33X_en_b.indd 6 32D33X_en_b.indd 6
Screws ( g 5)
(used in step 2)
Hex
key
• To detach the stand, perform the steps in reverse order.
1 Insert the stand into the openings on the
3
bottom of the TV.
2 Insert and tighten the 4 screws into the 4
holes on the rear of the TV.
Hex key
Screw
NOTE
Soft
cushion
2008-1-24 14:52:29 2008-1-24 14:52:29