Paradyne Comsphere 3920Plus Installation And Operation Manual page 92

COMSPHERE 392xPlus Modems
To access Rem_Digital_Loop from the Test branch, make the following selections:
Press the
The message Started appears on the LCD, and the Test LED lights.
If OtherTestActive appears on the LCD, another test is in progress. Select Abort to clear the
current test and try again. If the Test Timeout configuration option is enabled, Test Timeout
appears at the conclusion of the test. If it is disabled, the test operates until aborted. For more
information on the Test Timeout configuration option, refer to the Test section in Chapter 4.
To exit this function and remain in the Test branch, press the
Top-Level menu, press the
3-58
Test:
Rem_Digital_Loop
F3
F1 F2
key until Rem_Digital_Loop appears. Press any function key to start this test.
Test:Remote Loop
Started
F3
F1 F2
key.
April 1995
key. To exit and return to the
3920-A2-GN31-10