COMSPHERE 392xPlus Modems
Cloning a Single TMp Remote
Press the F1 key to select Single Clone Remote.
The address field (xxx) displays the network management address of the modem that receives the
download. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
( _ ) under the digit to be incremented. Press the F2 (
Press F1 (Ent) to select the modem that will receive the download.
The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.
To increment digits within the password field (yyyyyyyy), use the
cursor ( _ ) under the digit to be incremented. Press the F2 (
Press Enter (Ent) to select the modem that will receive the download.
After completing these actions, proceed to the section titled Implementing a Clone Remote
Operation.
3-46
Choose DLL Type >
Single
Multiple
F3
F1
F2
Choose Address:
"
Ent
xxx
F3
F1
F2
Choose Password:
"
Ent
yyyyyyyy
F3
F1
F2
April 1995
and
keys to position the cursor
"
) key to increment the digit.
and
keys to position the
"
) key to increment the digit.
3920-A2-GN31-10