AMC DSP 88 User Manual page 21

In the top left corner of this window, click on the "Device" button that is founded next to "Presets". This
initializes the configuration menu of the network card found in the rear of the DSP 88 unit. Within this
dialogue menu, enter the information received from the previous DOS prompt instruction into the
respective boxes.
• IP address
• Gateway
• Subnet mask
Please ensure that you enter the information in to the fields correctly and in the right order.
Please note :
To avoid IP conflicts between PC and device, the last field of the "Device Address" must be an unique
number between the 1 and 254. Every computer, DSP 88 device and all other network devices should have
their own number with no duplication of addresses anywhere on the network. Please make note of the
unit's unique IP address that has been allocated to the DSP 88, as it is needed for further configuration
within AMC DSP Software Control. Save the setting by clicking "OK".