Loading Matrox Hdmi Calibration Settings; Enabling And Disabling The Matrox Hdmi Calibration Settings - Matrox MXO2 Installation And User Manual

50

Loading Matrox HDMI calibration settings

After calibrating your HDMI monitor and saving your calibration settings to a
file (see
are automatically loaded as the current HDMI calibration settings for your
system. You can, however, load another HDMI calibration settings file at any
time, but only one calibration settings file can be loaded for your system at any
given time. Once loaded, you can enable or disable the calibration settings (see

"Enabling and disabling the Matrox HDMI calibration settings"

¦ Note If your system has multiple users, the loaded calibration settings apply to
the logged on user only.
Right-click the
1
Configuration
RGB - calibrated
Click OK to save your video output settings.
2
Right-click the
3
HDMI Calibration Utility
From the Welcome page, click Load Settings .
4
When prompted, select your desired .mtx calibration settings file, and then
5
click Open .
Enabling and disabling the Matrox HDMI
calibration settings
The HDMI calibration settings that are loaded for your system (see
Matrox HDMI calibration settings"
When using a program that supports Matrox MXO2 video output, you can
configure the Matrox video output settings for that program to enable or disable
the loaded HDMI calibration settings. For example, you can configure the MXO2
video output settings that you want to use with Matrox A/V Tools as explained in
"Specifying your video output settings"
output settings (MXO2 Mini)"
When you set the HDMI video output to RGB - calibrated , the video that is
output from the MXO2 HDMI output will have the color settings that are saved in
the currently loaded calibration file. This is used when you want to monitor video
on your RGB HDMI monitor.
To disable the loaded calibration settings and output HDMI video from MXO2
with its native color settings, set the HDMI video output to YUV or RGB -
native
output. For example, you can set the HDMI video output to RGB - native when
Chapter 7, Calibrating Your HDMI Monitor for Video
"Calibrating your HDMI monitor"
icon on your Windows taskbar, choose Output
and on the Video Output page, set the HDMI output to
.
icon on your Windows taskbar, and choose Matrox
, depending on the HDMI device you connected to the MXO2 HDMI
on page 48), the calibration settings
.
on page 50) can be enabled or disabled.
on page 178
on page 182.
on page 50).
"Loading
and "Specifying your video