Beat Waving Function; Dj Beat Function; Booting Sound Function - Samsung MX-FS9000 User Manual

BEAT WAVING Function

You can switch the Speaker LED mode to your
preference.
1. Each tim
e you press the BEAT WAVING button on the
product, the Speaker LED display mode will change as
following:
PARTY 1 ; PARTY 2 ; FUN 1 ; FUN 2 ; PURE ;
FRESH ; LOVE ; JOY ; SUNSET ; SUNRISE ;
NATURE 1 ; NATURE 2 ; WAVE 1 ; WAVE 2 ;
AURORA ; OFF
• If you select the BEAT WAVING OFF, all of the speaker
LED Lightings will turn off.

DJ BEAT Function

It sets FLANGER, PANNING, CHORUS, WAHWAH
sound effect and the level of each effect is adjust-
able.
☛
The set scope is [-15 ~ +15] and the initial set up
value are all 0.
FLANGER : It creates a vibration that is equal to the jet's rise/
fall.
PANNING : It increass the left/right speaker's output by turn
and makes it sound like it is moving from side to
side.
WAHWAH : It sounds like 'Wah~ Wah~'.
CHORUS : It creates a vibration like a singing a chorus.
1. To set the desired effect, press one of the
FLANGER, PANNING, CHORUS, WAHWAH
button of the product.
• The blue LED turns on around the relevant button and
the DJ BEAT button.
• You can control the level of effect that was set to
Volume Jog.
In order to control the volume, press the product's DJ
BEAT button.
• To cancel the set effect, press the relevant button once
more.
• To change the set effect, press the desired effect
button.
• The PANNING effect can be set with the FLANGER,
CHORUS, WAHWAH effect in duplicate.
• To set the PANNING effect in duplicate, press the
PANNING button when another effect is set up or
press another effect button when the PANNING effect
has been applied.
• Use Volume JOG to control the level of effect that was
set up at the end.
• To control the level of effect that was previously set,
press the button of effect that was set up at the end
and cancel the last effect first.
18
English

Booting Sound Function

If you set the booting sound, you can feel the
magnificent audio output of the product while it
boots up.
1. Press the product's GIGA SOUND BEAT button or
the remote control's GIGA button for a long time.
• The BOOTING SOUND menu appears on the display
panel.
2. Press the product's GIGA SOUND BEAT button or
the remote control's GIGA button for a long time to
turn ON or OFF the BOOTING SOUND.