Recalling The Free Combinations - Johannus Opus 5 User Manual

7. Close the memory by turning the key switch MEMORY LOCK a quarter turn to the left and
remove, if necessary, the key from the switch. The light in the SET piston will go off to
indicate that the memory is not accessible anymore.
8. Write the programmed combination (e.g. M2-3GR) in your music paper where you want to
use it.
The personal registration has now been stored in memory bank 2 in number 3 of the great
division.
On the Opus 5 AGO a free combination is programmed as follows:
1. Choose the registration you want to store in the capture system.
2. Push on SET (keep on pushing) and choose the memory number (e.g. piston number 3).
3. First release the piston for the memory number (in this example number 3) and then the SET
piston.
The personal registration has now been stored in memory number 3.

Recalling the free combinations

To recall the personal registrations it is not necessary to make the capture system accessible
with the key switch MEMORY LOCK. Recalling goes as follows:
1. Determine the setter combination you want to recall (e.g. M2-3SW).
2. Choose the memory bank with the - and + pistons (e.g. M2). The memory bank shows up in
the display.
3. Then choose the memory number (e.g. push piston 3 of the swell division).
In the registration you recalled you may add or remove stops by hand,
On the Opus 5 AGO the recalling of a personal registration goes as follows:
1. Determine the setter combination you want to recall (e.g. 3).
2. Choose the memory number (e.g. 3).
User's Manual
JOHANNUS JOHANNUS
18
Opus 5, 10, 20 and 30 AGO