Table of Contents
Advertisement
Quick Links
XX029-01-01
MODEL V4400QS-1 AND V4400QS-1P
DIGITAL COLOR QUAD SPLITTERS
Copyright © 2003 Vicon Industries Inc. All rights reserved.
Product specifications subject to change without notice.
Vicon and its logo are registered trademarks of Vicon Industries Inc.
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: +44 (0) 1489 566300
WEB: www.vicon-cctv.com
Vicon part number 8009-8029-01-01
Rev 403 Section 5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon V4400QS-1
Summary of Contents for Vicon V4400QS-1
- Page 1 Copyright © 2003 Vicon Industries Inc. All rights reserved. Product specifications subject to change without notice. Vicon and its logo are registered trademarks of Vicon Industries Inc. VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788 TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116...
- Page 3 FCC Notice Note: Complies with Federal Communications Commission Rules & Regulations Part 15, Subpart B for a Class A digital device. WARNING This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instruction, may cause interference to radio and television reception.
-
Page 4: Important Safeguards
Use only with a mounting accessory recommended by Vicon, or sold with the video product. Any mounting of the video product should follow Vicon’s instructions, and a mounting accessory recommended by Vicon should be used. - Page 5 Vicon or that have the same characteristics electric light or power circuits, or where it can fall into such as the original part.
-
Page 6: Table Of Contents
CONTENTS UNPACKING ……………………………………………………………….… 1 SERVICE ……………………………………………………………………… 1 DESCRIPTION ………………………………………………………………… 1 V4400QS-1 …………………………………………………………………….. 1 INSTALLATION ……………………………………………………………….. 2 V4400QS-1 Connections ……………………………………………………. 2 PROGRAMMING ………………………………………………………………. 2 Key Functions ………………………………………………………………… 3 Camera Setup ………………………………………………………………… 3 5.2.1 Camera Titles ………………………………………………………………… 4 Time and Date ……………………………………………………………….. 4 5.3.1... -
Page 7: Unpacking
DESCRIPTION V4400QS-1 The V4400QS-1 Digital Color Quad Splitter provides on-screen display of four camera inputs combined with numerous additional functions. Each quadrant may be sequenced full screen or be displayed in a quad split. The image display is updated at the field rate of 60 field/sec, providing genuine real-time video. In addition to the quad screen display, the unit offers “digital zoom”... -
Page 8: Installation
4. INSTALLATION 4.1 V4400QS-1 Connections Power DC12V adaptor camera 4 camera 3 Power camera 2 Adaptor camera 1 Alarm Connect AC-IN Looping (Automatic Termination) Looping(Automatic Termination) Monitor output Output Input Time Lapse VCR Monitor 1 Monitor 2 Alarm In Quad Alarm Out Pin No. -
Page 9: Key Functions
Selects quad display on monitor. Enters or sets function. Programming the V4400QS-1 includes writing titles for the video inputs, assigning dwell times for each input and the quad display for sequential (SEQ) operation, enabling or disabling the video loss alarm, and enabling or disabling the password. -
Page 10: Camera Titles
Press the 1/ and 2/ keys to move the cursor to the required channel. Press the QUAD/ENTER key to increase the dwell time. Dwell times may be programmed from SKIP to 99 seconds. (When you reach 99 seconds, pressing the QUAD/ENTER key will toggle you through the sequence again. -
Page 11: Date Format
To set the time and date properties, shift the cursor into position by pressing the 3/ (or 4/) keys and select the required time and date values using the1/ and 2/ keys. 5.3.2 Date Format Select the DATE FORMAT on TIME/DATE SETUP screen. Press the QUAD/ENTER key to toggle choices and select date format. -
Page 12: Pip Mode Setup
DISPLAY SETUP PIP MODE SETUP COLOR SETUP VCR OUT :QUAD ONLY TITLE DISPLAY : ON TIME/DATE DISPLAY : ON DISPLAY POSITION : BOTTOM EXIT 5.5.1 PIP Mode Setup Select PIP MODE SETUP on DISPLAY SETUP screen. The following menu is displayed. PIP MODE SETUP PIP MODE : ENABLE PIP FORM : SETUP... -
Page 13: Vcr Output
CAMERA BRIGHTNESS !!!!!!!!!!!!!!!!! Select camera using the 1/ key. Select Brightness or Contrast using the 2/ key. Control brightness/contrast of camera by the 3/ (darkens/decreases contrast) and 4/ (lightens/increases contrast) keys. Press the QUAD/ENTER key to exit COLOR SETUP menu. 5.5.3 VCR Output Select VCR OUT on DISPLAY SETUP screen and press the QUAD/ENTER key to toggle selections. -
Page 14: New Password
DISABLE OPERATION 6.1 V4400QS-1 Operation Normal operating selections are made using the eight front panel keys, and functions are selected with a single key press. The V4400QS may be controlled by a host computer using a simple RS-232 command set. -
Page 15: Vcr
6.1.2 VCR The VCR key selects the input from the VCR to be displayed on the system monitor. You can view the recorded VCR images in a quad format or any quad can be zoomed to full-screen. To View Recorded VCR Images 1. -
Page 16: Video Loss Alarm
To return to the previous mode, press the same numeric key. 6.1.8 Computer Remote Control V4400QS-1 uses a very simple command set, each command consisting of three characters. The first character in all cases is the slash or virgule (/). The unit looks only for a three-character command, with an initial slash. -
Page 17: Maintenance
- Time and Date are not changed; format is set up as MM/DD/YYYY. PASSWORD SET - Password is disabled. 7. MAINTENANCE The V4400QS-1 requires no routine maintenance and is designed for long, trouble-free use under normal operating conditions. Repair should only be attempted by qualified personnel. - Page 18 Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A.
- Page 19 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) !Infofax: 800-287-1207 Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Brussels Office...
Need help?
Do you have a question about the V4400QS-1 and is the answer not in the manual?
Questions and answers