Before You Begin; Assembly - HEALTH RIDER HRIVEL87514.0 User Manual

BEFORE YOU BEGIN

Thank you for purchasing the Healthrider® Cross
Trainer 950. The elliptical provides an array of fea-
tures designed to make your workouts at home
more effective and enjoyable.
For your benefit, read this manual carefully be-
fore you use the elliptical. If you have questions
after reading this manual, please see the front
cover of this manual. To help us assist you, note
the product model

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and re-
move the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
an adjustable
As you assemble the exercice bike, use the drawings below to identify small parts. The number in
parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it has been preassembled.
wrench.
S5 1PCS
10
(S17,S19)
26 M10 20 2PCS
number and serial number before contacting us.
The model number is HRIVEL87514.0 and the lo-
cation of the serial number decal are shown on the
front cover of this manual.
Before reading further, please familiarize yourself
with the parts that are labeled in the drawing be-
low.
37
! 12 M10 80
33
1PCS
4
S6 2PCS
2PCS
M8X45 6PCS
and