Table of Contents
Advertisement
8_2 Error message
Error massage and its meaning are as follows:
DIAG. MEMORY
DIAG. ENCODER
DIAG. DECODER
DIAG. CORE
POWER ALARM
FAN ALARM
NO TIME CODE IN
NO EXT SYNC
RAID1 DISK0
RAID1 DISK1
RAID1 DISK2
RAI0 DISK
DISK FORMAT
END OF DISK
ILLEGAL QUALITY
NO INPUT
FILE OVER FLOW
ILLEGAL FILE
ILLEGAL CLIP
Detects MEMORY fail in the diagnostic process after power
on.
Detects a fail on the ENCODER board in the diagnostic
process after power on.
Detects a fail on the DECODER board in the diagnostic
process after power on.
Detects a fail on the CORE board in the diagnostic process
after power on.
Detects an abnormal voltage of the DC power supply.
Detects a stop of the cooling fan.
There is no time code or an abnormal time code at the TC IN
connector when EXT TC mode is selected.
There is no external sync or an abnormal sync at the EXT REF
IN connector when EXT mode is selected as a GEN-LOCK
source.
Detects a fail on the DISK-0 when the RAID-1 is selected.
Detects a fail on the DISK-1 when the RAID-1 is selected.
Detects a fail on the DISK-2 when the RAID-1 is selected.
Detects a fail on any one of three disks when the RAID-0 is
selected.
Detects an error during the DISK FORMAT process. The DISK
FORMAT is not performed.
The recording reaches the end of disk when the recording
mode is NORMAL (not in Loop REC mode).
The Lossless mode is selected in RAID-1 HDD configuration.
There is no VIDEO INPUT or abnormal input at the start of
recording.
Number of REC files exceeds a maximum number of 512.
Selected a REC file that is not existing.
Selected a CLIP that is not existing.
37
Advertisement
Table of Contents
