1. Production Introduction 1.1 Package Content Package should include below items Device Car Charger Removable Buckle Sticker x 2 pcs Quick Start Guide Warranty Card Quick Guide CD (PC Software) Install English 1...
2. Install/Uninstall 2.1 Install Location Best mounting location 1. Put the device around the area of front rear view mirror, to have better view. 2. Make sure the lens is within windshield wiper area, to have the clear video quality in the raining day.
Page 21
2.2 Install 1. Put the device on top of the removable buckle. 2. Push to lock. 3. Stick the removable buckle on proper area. 4. Adjust the angle. P.S. Do not move the position of the buckle within 24 hours. 2.3 Uninstall 1.
3. Start to Use 3.1 Power On 1. Insert the car charger into the car lighter. 2. Insert the USB cable into the USB port. 3. Insert the SD card into the SD card slot, and switch for Power ON. 3.2 First Start On Setting the language, voice and time zone.
Page 23
3.5 Features of Each Button Introduction Button Feature On/Off Power ON/OFF Recording/ Time/ Trip Computer -Video saving Video Saving Backup -Back to recording Recording/ Time/ Trip Computer - Enter play list Map View Up/Play -Zoom In Play/ Setting Recording/ Time/ Trip Computer - Enter setting list - Push longer time for On/Off voice Down/Setting...
3.6 LED Light LED Color Definition Green Not recording Recording Recording Not insert SD card Out of memory SD card Keep glittering Error Not compatible SD card Over high/low temperature, will auto power off 3.7 Video screen 0:15 11:48 1. video time 2.
3.9 Map view 15.5 14.4 12.3 1. High way 2. Normal road Show exit name, toll booth and service Show current position and next road center along on the high way. name of the crossroad P.S. Above features need to have the GPS fixed first. 3.10 Time Mode 1.
3.11 Trip computer 1. Direction 2. Present speed 3. Total distance 4. Total time 3.12 5 Sets Video Reserved Space 1. Manual Save push the video copy button during recording for save the current video to prevent for auto rewritten. 2.
4.4 FCWS FCWS Activate the function, when speed over 60km/h it will detect the distance to front car, and give warning sound and screen warning to the driver to keep the safety distance, to prevent dangerous caused by too close to the front car. P.S.
2. Select play source file(Emergency Record or Last Record) 3. Select video to play/delete. 5.5 Info Stamp 1. Time 2. Road Name 3. Course 台北市, 內湖區,瑞光路302號 4. Speed E 121.3446,N25.0459, SE, 25 km/h 2012-05-11 08:13:20 PAPAGO! 5. Coodinate English 11...
6. System Setting 6.1 GPS Status Check satellite status. 6.2 G-sensor 1. G-sensor Staus: Show current data and could adjust manually. 2. Collide Record : To select off/low/middle/high sensitivity. 6.3 Driving Safety 1. LDWS : On/off LDWS detect. 2. FCWS : To select off/low/high sensitivity. 3.
6.5 Audio & Video 1. Volume Control : Adjust system volume. 2. Record Setting : On/off voice recording 3. Info Stamp : name/Speed/Coordinate : On/off video with speed/time/ road name/speed/coordinate info. 4. Voice Language : Sets the language for voice prompts 5.
7. Install GoLife 7.1 System inquiry Windows 7 / Vista / XP operating system Pentium 4 2.4GHz above Memory 512MB above Interface SD card reader Browser 7.2 Software package Please insert the CD disk to your computer, and follow the instruction to install GoLife for software player.
7.3 Player interface 1. Video file list 2. Showing Google Map with route and map info 3. Video playing 4. Feature list 5. Speed/G-sensor/G-sensor value display 6. Coordinate/file name & path/display time English 15...
Page 33
8. Caution 8.1 Usage Related 1. If car lighter still on after car power off, make sure to pull off the car charger, in case to run out all the battery or cause any accident. 2. There will be backup battery to record the files after car power off, device power off or any emergency power off.
5. SD card memory & recording time for reference (Exclude map data in the SD card) SD card Memory 1080p 30fps 90min 16GB 180min 32GB 360min 9. Reference Info To use car charger connect directly to car power source. (this installation method is not covered in the warranty.) 1.