Network Connection; Wired Network; Wireless Network - Samsung BD-H8500M User Manual

Network Connection

You can connect your product to your network
router using one of the methods illustrated
below.

Wired Network

Broadband modem
(with integrated router)
Or
Router
| NOTE |
\ Internet access to Samsung's software update
server may not be allowed, depending on the router
you use or your ISP's policy. For more information,
contact your ISP (Internet Service Provider).
\ DSL users, please use a router to make a network
connection.
\ To use the AllShare function with your PC, you must
connect your PC.
Broadband
service
Broadband
service
Broadband
modem
7

Wireless Network

| NOTE |
\ If the wireless router supports DHCP, your product
can use a DHCP or static IP address to connect to
the wireless network.
\ Set your wireless router to Infrastructure mode. Ad-
hoc mode is not supported.
\ The product supports only the following wireless
security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\ Select a channel on the wireless router that is not
currently being used. If the channel set for the
wireless router is currently being used by another
device nearby, it will result in interference and
communication failure.
\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type
on your router or router to WEP, TKIP or TKIP-
AES (WPS2Mixed), the product will not support
a connection in compliance with new Wi-Fi
certification specifications.
\ If your router supports WPS (Wi-Fi Protected Setup),
you can connect to the network via PBC (Push
Button Configuration) or PIN (Personal Identification
Number). WPS will automatically configure the SSID
and WPA key in either mode.
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by
other radio devices, etc).
\ To use the AllShare function with your PC, you must
connect your PC.
English
Wireless Router
Broadband
service